ARISD Paintless Dent Repair Puller Kit – Dent Puller Slide Hammer T-Bar Tool with 16pcs




Our paintless dent removal tools dent puller is a lightweight glue tab pulling tool, It not only for all kinds of cars dent removal, but also suitable for truck, Motorcycle, washing machine, Refrigerators and Hail damage and so on.
No labor cost and paint material cost, our products are exactly designed to save your time and money.
If you want to save money as well as enjoy the DIY time, thisT-Bar puller tools could be your best choice.

Number of Pieces: 23 (1pc T-Bar + 16 pcs Puller Tabs+6 pcs glue sticks )
Color: Silver + black
Type: paintless dent removal tools kit
Package Weight: 1480g
Function: Paintless dent removal

How to use:
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Choice the proper drawing gasket, you have 16 sizes gasket, Large dent requires a large drawing gasket.
4.Pull the trigger and apply the drawing gasket with extruded glue.
5.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 3-5 minutes. The cooling time should be less than 8 minutes and should be shorter slightly in winter);
6.While use this dent removel T Bar tools, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a knockdown tool.
8.Use alcohol and plastic shovel to clean up the residual glue.

Packing lncluded:
1x 2 in 1 Dent Removel T Bar Tools
16x Black Glue Pulling Tabs
3x Yellow Glue Sticks(7mmx270mm)
3x Black Glue Sticks (7mmx270mm)
1x pcs Operation Manual card


There are no reviews yet.

Be the first to review “ARISD Paintless Dent Repair Puller Kit – Dent Puller Slide Hammer T-Bar Tool with 16pcs”

Your email address will not be published. Required fields are marked *